Fenger 5351 Aircraft Paint Remover Gel- Uçak Boya Çözücü Jel COC Belgeli

FENGER 5351 VISCOZ COATING STRIPPER
EPOXY AND POLYURETHANE COATING REMOVER

NEUTRAL BASED COATING AND PAINT REMOVER

FENGER 5351 is a viscous paint stripper that rapidly and effectively strips a wide variety of coatings, is a high-performance, solvent based, viscous stripper, used to strip aircraft primers, epoxy, polyurethane, and other organic coatings from metal surfaces.

NÖTR BAZLI KAPLAMA VE BOYA SÖKÜCÜ

FENGER 5351, çok çeşitli kaplamaları hızla ve etkili bir şekilde sıyıran viskoz bir boya sıyırıcıdır, yüksek performanslı, solvent bazlı, viskoz bir sıyırıcıdır, uçak astarlarını, epoksiyi, poliüretanı ve diğer organik kaplamaları metal yüzeylerden sıyırmak için kullanılır.

APPLICATION

. Tanks and associated equipment may be fabricated from mild steel or stainless steel. Stainless steel is preferred. Concentration: Use at full strength, as received.

Immerse parts into stripper, below the seal layer. The seal layer retards evaporation of solvents and does not have stripping capabilities. Allow sufficient time for stripper to loosen finish.

Rinse: Remove parts from stripper tank and rinse with high volume, high pressure cold water.

Seal Maintenance: The seal layer is gradually depleted through evaporation and drag-out. Maintain seal layer at 10% by volume by addition of clean, cool water.

Stripper Control: Normal adjustments will require water only, but extended heavy use may also require additions of solvent. Refer to your sales engineer for specific recommendations.

PROPERTIES

1.    Physical appearance: gel

2.      Color: Yellow

3.      Odor: distinctive

4.       Density (at 20˚): 1,060 gr/cm3

5.      pH(1% dil.): approx. 7,00-7,50

PREVENTIVE ACTIONS

Read instruction manual before usage. Keep away from the kids.

Do not use for food cleaning.

Wash with water awfully in case of eye(s) contact.

APPROVALS AND CONFORMANCES:

MIL-R-81294 Type 1, Class 1